Faucet Installation Near Me

Starting price: Call for pricing
Plumbing Pros removes your old kitchen or bathroom faucet and installs the new one the right way. We check the fit, seal the base, connect new supply lines, and test for leaks.
What faucet installation covers
Faucet installation is the full swap of one fixture for another. The old faucet comes out, the new one goes in, and everything between the supply valves and the spout gets checked, sealed, and tested. A standard installation covers the faucet body, the handles, the spout or sprayer, the mounting hardware, and the supply lines that connect it to your shutoffs. It is a focused job, and that focus is what keeps it clean and quick.
It does not cover the sink or the countertop itself. If the sink is cracked, the deck has softened, or the drain assembly needs replacing, those are separate jobs. A straight installer tells you where the faucet job ends and the next job begins, before any tools come out.
When a new faucet makes sense
If your faucet drips constantly, sticks when you turn it, leaks at the base, or simply no longer fits the room, replacement usually beats another repair. These are the signs we see most:
- A steady drip from the spout that tightening the handle cannot stop
- Handles that stick, spin freely, or need force to shut the water off
- Water pooling at the base of the faucet or dampness inside the cabinet
- Rust, pitting, or a finish that no longer cleans up
- Weak or uneven flow that cleaning the aerator does not fix
- A remodel where the old faucet no longer matches the sink or the style
Any one of these is a good reason to talk through your options. A quick look under the sink usually tells us whether a repair is worth doing or whether a new faucet is the smarter move.
How the installation works
A faucet installation follows the same order every time: water off, old faucet out, connections checked, new faucet set and sealed, supply lines connected, then everything tested. Here is how a typical visit goes:
- Shut the water off. We close the hot and cold supply valves under the sink and open the faucet to release the pressure left in the lines.
- Remove the old faucet. The supply lines and mounting hardware come off, the old fixture lifts out, and the deck gets cleaned of old putty, grime, and mineral buildup.
- Check what is underneath. We look at the shutoff valves, the supply lines, and the condition of the mounting surface. Worn valves or tired lines get replaced now, because they are the parts most likely to cause the next leak.
- Set the new faucet. The faucet goes into the mounting holes on its gasket. The base gets a bead of silicone or plumber's putty, and the mounting hardware is tightened so the body sits level and solid.
- Connect the supply lines. New braided lines run from the faucet to the shutoffs, hot to hot and cold to cold, with each connection snugged to seal without cracking the fitting.
- Test everything. Water goes back on. The faucet runs through every handle position and sprayer setting, and we check under the sink with a dry hand and a flashlight for any sign of a leak.
Most of the visit is the checking and the testing. The swap itself is straightforward; the value is in catching the weak part before it becomes a flooded cabinet.
What affects the cost
The cost of a faucet installation depends on three things: the fixture you choose, the shape your plumbing is in, and how the new faucet mounts. There is no single flat figure that fits every home. These are the factors that move it up or down:
- The style of faucet: a single-hole kitchen faucet is simpler than a widespread bath set, a wall-mount, or a model with a separate sprayer and soap dispenser
- The condition of the shutoff valves and supply lines, since corroded or stuck parts add work
- Whether the new faucet matches your sink's hole pattern, or needs a deck plate or hole covers to bridge the difference
- Access under the sink: a clear cabinet goes faster than one packed around a disposal and a water filter
- Whether you supply the faucet yourself or one is ordered for the job
- Whether other fixtures are handled on the same visit, which spreads the trip across more work
An exact figure only comes from seeing your sink and your fixture. The next step toward one is a short conversation about what is under your sink and what you want to put on top of it.
How Plumbing Pros serves your area
Plumbing Pros installs kitchen and bathroom faucets for homes and small businesses across the service area — single-family homes, condos, rentals, and offices or restaurants with standard fixtures. We work on the fixtures you buy and the ones you ask us to bring. Every visit ends the same way: a leak check under the sink, a walkthrough of where your shutoffs are, and a clean work area. If you are comparing a repair against a replacement, we will give you a straight read on which one makes sense and why.
Features
- Compatibility check first: hole spacing, deck thickness, and valve fit measured before installation
- Old faucet removed and the mounting surface cleaned and prepped
- New braided supply lines connected on every standard installation
- Base sealed with silicone or plumber's putty to block deck leaks
- Hot and cold orientation confirmed at every handle position
- Full leak check under the sink before the visit wraps up
- Shutoff locations shown to you when the job is done
Benefits
- No drips, wobbles, or water stains on the deck
- Finish stays showroom-new because tools never rest on it
- Supply shutoffs confirmed working, so future leaks are easy to stop
- Most standard kitchen and bath setups are done in one visit
- Honest repair-or-replace advice before you spend on a new fixture
- Work area left clean, with nothing left for you to finish
Frequently asked questions
Can you install a faucet I already bought?
Yes. We check that it fits your sink's hole pattern, deck thickness, and water connections first. If it fits, we install it with new supply lines and test it the same as any other job.
Do the shutoff valves under the sink need to be replaced too?
Not always. We turn them and check them during the visit. If they move freely and hold water back, they stay. If they are corroded or stuck, replacing them now prevents a much bigger leak later.
How long does a faucet installation take?
The typical faucet swap — kitchen or bath — is a one-visit job. Switching hole patterns, replacing corroded valves, or working in a tight cabinet adds time, and we tell you that before we start.
Should I repair my dripping faucet or replace it?
If the faucet is heavily worn, corroded, or keeps failing after repair, replacement is usually the smarter move. We look at the fixture and the plumbing under it, then give you an honest answer either way.
What does a faucet installation cost?
It depends on the fixture, the condition of your valves and supply lines, and how the new faucet mounts. We walk through those factors with you, and a quick conversation about your setup is how you get an exact figure.
Can you change the hole pattern, like going from three holes to one?
Often, yes. A deck plate covers the unused holes and lets a single-hole faucet sit cleanly on a three-hole sink. We measure the spacing and deck thickness first to make sure the combination works.
Do you install touchless or sensor faucets?
Yes. Sensor and touchless models mount like standard faucets but need batteries or a power connection, plus a little extra care with the supply connections. We handle that setup and show you how the sensor behaves before we leave.