Kitchen Plumbing Remodel Near Me

Plumber roughing in new supply lines during a kitchen remodel

Starting price: Call for pricing

A kitchen plumbing remodel from Plumbing Pros rebuilds the water, drain, vent, and gas piping around your new layout — measured against your cabinet drawings, not guesses. We rough in supply lines, slope drains, size vents, and relocate gas connections so every fixture, appliance, and island lands exactly where your designer put it. The result is a kitchen that works as well as it looks, with shutoffs you can reach and plumbing hidden neatly behind the finishes.

What a kitchen plumbing remodel covers

Kitchen plumbing remodels move or replace the pipes behind your new layout: water supply lines, drain and vent piping, and gas lines for the cooking area. It includes rough-in work before drywall, then finish connections for the sink, faucet, dishwasher, disposal, refrigerator water line, and range after cabinets and counters are set. It does not include the design work, cabinetry, countertops, electrical, or drywall. The piping must still be planned around all of them, which is why the plumber needs your drawings before anyone starts cutting.

Most of this work is invisible when the job is done. Pipes run through studs, joists, and chases, sized and sloped so water arrives with steady pressure and drains leave without gurgling. Small details decide the outcome. The fall on a drain line, an air gap on the dishwasher discharge, and a shutoff valve placed where a hand can actually reach it all matter.

Timing matters more than most homeowners expect, because the finished kitchen hides everything. Rough-in piping has to be installed, pressure-tested, and inspected before drywall goes up. A blocked vent route or a drain with no path to the stack is cheap to fix while walls are open. After they close, the same fix costs far more in labor.

When your kitchen needs plumbing work — not just new fixtures

Swapping a faucet or a like-for-like sink keeps the pipes where they are. A plumbing remodel is needed when the layout itself changes. These are the signs the pipes have to move, not just the fixtures:

  • Sink moving to an island, peninsula, or a different wall
  • Range shifting to a new wall or changing between gas and electric
  • Dishwasher changing sides, or entering a kitchen that never had one
  • Refrigerator with a water and ice dispenser where no line exists
  • Adding a pot filler, a prep sink, or a second dishwasher
  • Slow drains or weak pressure at fixtures keeping their old pipes

If two or more of these sound familiar, the plumbing deserves its own plan inside the remodel — not an afterthought once cabinets are ordered.

How the kitchen plumbing process works

Most kitchen plumbing remodels follow the same five phases, from a light refresh to a full gut renovation:

  • Walkthrough and plan. We study your cabinet drawings, then walk the existing kitchen to see where pipes really run. Conflicts between the plan and the reality get flagged here, while rerouting is still simple. That means a drain with no path to the stack, a vent that stops short, or a gas line too small for the new range.
  • Routing. We map new supply, drain, and vent paths through studs, joists, and chases. Hot and cold lines are laid out so pressure stays balanced when the dishwasher fills, and drain routes get the fall they need to carry water away quietly.
  • Rough-in. During demolition, lines the new layout abandons are capped or removed and new piping goes in. Every joint is pressure-tested before the walls close, so leaks are caught while they are still easy to reach.
  • Inspection. Most areas require a code check of the rough-in. We coordinate timing with your contractor so the inspection clears before drywall, keeping the rest of the trades on schedule.
  • Trim-out. After cabinets and countertops are set, we install faucets and connect the dishwasher, disposal, and refrigerator line. We align the gas connection for the range, then run every fixture the way you will actually use it.

What affects the cost of a kitchen plumbing remodel

No two kitchen plumbing remodels cost the same, and any number given without seeing your drawings would be a guess. These are the factors that actually move the price:

  • How far fixtures move. Shifting a sink three feet costs less in piping than moving it across the room to an island, because drain slope and venting get harder with distance.
  • Access under and behind the kitchen. Open joists in a basement make routing straightforward; a concrete slab forces cutting and patching, which adds labor.
  • Gas line changes. Moving a range to a new wall or switching fuel types means new gas piping sized for the appliance.
  • Vent complexity. Island sinks and distant fixtures need special venting, which takes more planning and material.
  • Condition of existing pipes. Demolition sometimes reveals corroded drains or undersized supply lines the new layout cannot reuse.
  • Fixture count. Each added sink, dishwasher, or pot filler means another supply branch, drain connection, and shutoff.
  • Project timing. Plumbing squeezed into a rushed schedule, or reworked around other trades’ delays, takes more trips.

How Plumbing Pros serves your area

We work in kitchens at every stage of planning — from homeowners holding a designer’s full drawing set to people who only know the sink has to move. Plumbing Pros plumbers read cabinet drawings the way other trades read blueprints, so the piping lands where the design says it should. We coordinate directly with general contractors, kitchen designers, and cabinet shops, keeping the plumbing on the schedule the rest of the trades depend on.

The homes we serve range from older houses with galvanized lines and improvised past repairs to newer builds where the kitchen was roughed in for a different layout. Condos and townhomes get the same care, with attention to shared walls and building rules about noise and water shutoffs. Wherever your kitchen sits, the goal is identical: pipes you never think about, behind a kitchen you use every day. When your drawings are ready, walk us through the plan and we will map the plumbing to match.

Features

  • Rough-in plumbing mapped to your cabinet drawings before demolition
  • Island and peninsula sink supply, drain, and vent routing
  • Gas line relocation sized for your new cooking layout
  • Dishwasher, refrigerator, and disposal hookups with reachable shutoffs
  • Venting and drain slope corrected for new fixture locations
  • Trim-out of faucets and fixtures matched to your finishes

Benefits

  • Layout changes planned on paper, so pipes never fight your cabinets
  • Rough-in timing coordinated with your contractor’s schedule
  • Appliances connected and tested under real working conditions
  • Labeled shutoffs that make future maintenance simple
  • New plumbing hidden behind finished walls, nothing left exposed

Frequently asked questions

How much does a kitchen plumbing remodel cost?

It depends on how far fixtures move, how pipes are accessed, whether gas lines change, and what demolition reveals. No honest number exists without the drawings. Bring the plan and ask for a quote based on your layout.

Do I need a plumber if my new sink goes in the same spot?

If the sink, dishwasher, and range stay where they are, the job is mostly fixture swaps and connections — simpler and faster. A full plumbing remodel is for layout changes, where pipes must travel to new locations.

Can a kitchen sink drain properly from an island?

Yes, with the right venting. Island sinks use a loop vent or an approved air admittance valve so the drain flows quietly and traps stay sealed. We plan the vent route before the island base is built.

Does moving my gas range require new gas piping?

Usually, yes. A range on a new wall needs a gas line run to it, and switching between gas and electric changes the requirements entirely. The line must also be sized for the appliance’s demand.

What happens if plumbing problems are found during demolition?

We stop, show you what we found, and adjust the plan before walls close. Corroded drains and undersized supply lines are common surprises in older kitchens, and fixing them during the remodel costs far less than opening walls later.

Will you work with my contractor or kitchen designer?

Yes. Remodels go smoothly when the plumber, contractor, and designer share one schedule. We coordinate rough-in and trim-out timing with your team so inspections and finish work happen in the right order.

Call (877) 401-2673 to get started
Call (877) 401-2673