Reverse Osmosis Drinking Water Systems Near Me

Starting price: Call for pricing
A reverse osmosis drinking water system is a compact, multi-stage unit that fits under the kitchen sink and delivers highly purified water through a dedicated faucet. Tap water passes sediment and carbon pre-filters, then a semipermeable membrane that rejects the dissolved solids behind off tastes and odors. Plumbing Pros installs, services, and maintains these systems so every glass tastes clean.
What a reverse osmosis drinking water system does
A reverse osmosis drinking water system is a compact, multi-stage filter that installs under the kitchen sink. It uses household water pressure to push tap water through a semipermeable membrane, which blocks most dissolved solids while clean water passes through to a dedicated faucet.
Everything in the system exists to serve one faucet. Tap water enters, passes through sediment and carbon pre-filters, meets the RO membrane, gets a final polish, and waits in a small pressurized tank until the dedicated faucet opens. That single tap is the whole point: water made only for drinking and cooking, separate from the rest of your plumbing.
It is not a whole-house solution. Pushing every gallon your home uses through a membrane would be slow and wasteful, so softening and whole-house filtration exist for that job. RO is the specialist: a dedicated stream of highly purified water exactly where you need it most, at the kitchen sink.
When your home is a good fit
Most people start looking into RO for a simple reason: they do not love what comes out of the tap. Any of these sound familiar?
- Your tap water carries a chlorine or chemical taste that shows up in your coffee and your cooking.
- You buy bottled water mostly because you don't fully trust what's in the tap.
- An older home with aging pipes has you wondering about lead or other dissolved metals.
- Off odors rise from the cold tap even when the water looks perfectly clear.
- You mix baby formula at home and want the cleanest possible starting point.
- Your household drinks a lot of water and a pitcher filter simply can't keep up.
How the stages work, in order
Installation day follows a fixed sequence. The installer tests and measures, mounts the filters and tank under the sink, and ties into the cold water line and the drain. Then comes the faucet, the tubing, and a pressure check of every joint — with the first tanks of water flushed before you drink a drop.
Most residential systems use five stages. First a sediment pre-filter catches sand, silt, and rust particles that would otherwise clog everything downstream. Next a carbon block filter strips out chlorine and chloramine, which matters because chlorine damages RO membranes. Then comes the heart of the system: the semipermeable membrane itself.
Household water pressure pushes water against the membrane, and only water molecules pass through its microscopic pores. Dissolved solids — minerals, salts, fluoride, nitrates, lead — stay behind and get flushed to the drain. A polishing post-filter gives the clean water a final pass before it collects in the pressurized storage tank. The tank matters because the membrane makes water slowly; stored, pressurized water is what gives you a full, fast glass on demand.
Installation follows the same order every time. The installer checks the space under your sink and tests the incoming water, mounts the filter housings and tank, and connects a feed-water adapter to the cold supply line. A drain saddle carries the reject water away, and a small dedicated faucet goes into the sink or countertop — using an existing sprayer hole when one is free. Tubing links every part, every joint is checked for leaks under pressure, and the first tank of water is flushed before you drink any.
What shapes the cost of an RO system
No honest plumber quotes an RO install sight unseen, because the real variables are under your sink. These are the factors that move the number:
- Stage count and membrane capacity — a bigger membrane and extra stages mean more parts and more labor.
- Condition of the plumbing under the sink — corroded shutoff valves and cramped cabinets add time.
- Faucet mounting — a sink with a spare hole is simple; stone and granite counters need careful drilling.
- Drain connection and local code — some areas require an air gap fitting on the drain line.
- Add-ons — a remineralizer cartridge for taste, or a booster pump where household pressure runs low.
- Your water and your use — heavier demand shortens the filter-change schedule, which affects the first-year plan.
An exact figure takes a look at your setup. Nobody can name a fair number without seeing the sink, the plumbing, and the water itself.
How Plumbing Pros serves your area
Plumbing Pros installs RO systems in homes of every age — from new builds to houses with decades-old plumbing. Small offices and break rooms that want better water are covered too. Each install starts with your actual water and your actual use: household size, what the tap tastes like now, and how much space sits under the sink. That decides the stage count, the tank size, and the filter schedule — not a one-size-fits-all box.
Results are verified, not assumed. A TDS meter reading before and after the install shows exactly what the membrane removed, so you see the difference in a number instead of taking it on faith. Plumbing Pros also services systems it didn't install: membrane and filter changes, tank and faucet repairs, and full re-tunes when an older unit stops performing. If the idea of water this clean at one dedicated tap sounds right, the next step is simply a look at what's under your sink.
Features
- Sediment pre-filter that blocks grit, silt, and rust before water reaches the carbon stage
- Carbon pre-filter that strips chlorine before it reaches the membrane
- High-rejection RO membrane that blocks dissolved solids, lead, and fluoride
- Polishing post-filter for a clean, neutral finish
- Pressurized storage tank so purified water is ready on demand
- Dedicated faucet separate from the main kitchen tap
- Option to tee into the fridge line for filtered ice and dispenser water
Benefits
- Cleaner-tasting water for drinking, coffee, and cooking
- Less reliance on bottled water and pitcher filters
- One dedicated stream of highly purified water at the sink
- Compact under-sink unit that stays out of sight
- Pre-filtration that shields the membrane and extends system life
- Maintenance schedule matched to your water and your use
- Verified results shown in a before-and-after TDS reading
Frequently asked questions
Does reverse osmosis remove lead?
Yes. The RO membrane is highly effective at reducing lead along with other dissolved metals, which is one reason homeowners with older plumbing choose these systems.
Does RO water still have healthy minerals?
The membrane removes most dissolved minerals, including calcium and magnesium. If you prefer some mineral content back in the water, an optional remineralizer cartridge adds it after filtration.
Does a reverse osmosis system waste water?
Some water does go to drain — that's how the membrane carries rejected solids away. Newer system designs recover far more water than older ones did, so efficiency varies by model.
How often do the filters need to be changed?
Pre-filters get swapped far more often than the membrane; many households change them about once a year. Your water quality and daily use set the real schedule, which Plumbing Pros plans at install time.
Can one system feed my fridge's ice maker too?
In most kitchens, yes. A line can be teed off the system so the fridge dispenser and ice maker draw the same purified water as the dedicated faucet.
Will it fix hard water spots on my dishes?
No — an under-sink RO unit purifies only the water at its own faucet. Spots from hard water are a whole-house issue, and a softener is the tool built for that job.