Sink Repair & Installation Near Me

Plumber installing a new bathroom sink and drain

Starting price: Call for pricing

A leaking sink quietly damages cabinets long before you ever see water on the floor. Plumbing Pros repairs strainers, traps, and drain assemblies — or installs a brand-new sink matched to your countertop. Every job ends with a full-basin release test, so the drains run quiet and the cabinet stays dry.

What sink repair and installation covers

Sink repair fixes the working parts of a sink you already own: the strainer basket, drain assembly, P-trap, tailpiece, supply lines, and the caulk or seal at the rim. Installation sets a brand-new sink into your countertop and connects the drain, the water supply, and the garbage disposal. What it does not cover is plumbing inside the walls, sewer mains, or rebuilding a damaged cabinet.

Common repair jobs start small. A strainer basket loosens a fraction of a turn and lets water weep into the cabinet. A P-trap develops a hairline split. A tailpiece corrodes from the inside out.

A pop-up assembly stops sealing, or the caulk at the rim pulls away from the counter. These are parts-level fixes: the basin stays put, and only the failed component gets repaired or swapped.

Full installations replace the basin itself. Drop-in sinks rest in the cutout with a rim sitting on top of the counter. Undermount sinks hang from clips beneath the counter, which gives a clean wipe-down edge but needs solid cabinet support and an accurate cutout.

Farmhouse sinks show an exposed front apron, while vessel bowls sit entirely above the counter. The mounting style decides much of the job's complexity before anything is touched.

Signs your sink needs repair or replacement

  • A musty smell inside the cabinet under the sink
  • Water pooling under the trap or along the cabinet floor
  • Swelling, sagging, or soft spots in the cabinet base
  • A drip that appears only when the dishwasher drains
  • Rust rings or stains around the drain opening
  • Caulk pulling away from the sink rim or countertop
  • A sink that rocks or has shifted in its cutout
  • Slow draining or gurgling even after the drain is cleared
  • Porcelain cracked through, or enamel worn to bare metal

How the process works

1. Request service and describe what is happening — a leak, a crack, a slow drain, or a planned remodel. This shapes which parts and sink types are brought to the visit, so the job can be finished without a second trip.

2. A plumber looks at the sink, the cabinet, the shutoff valves, and the supply lines. You get a straight answer on whether repair or replacement makes more sense before any work starts.

3. For a repair, the water is shut off and verified, the failed part comes out, and its replacement goes in. A new strainer gets bedded in putty or silicone, a new trap is aligned and tightened, and a fresh seal goes at the rim.

4. For an installation, the old sink and strainer come out, and the cabinet is checked for past water damage. The new sink is set and sealed, the drain assembly and disposal flange are bedded, the trap is aligned, and the supply lines are connected.

5. Every job ends with a full-basin release test: the basin is filled, then released all at once while every joint is watched. The cabinet is left dry, the drain quiet, and the shutoff locations are shown to you so you know where they are.

What affects the cost

No two sink jobs cost the same because the work behind them differs so much. The biggest factor is scope: resealing a strainer is a fraction of the labor of swapping a full sink. The sink's material matters too — stainless steel is light and simple to set, while fireclay and stone composites weigh more and need careful handling.

Mounting style changes the labor as well. A drop-in replacement into an existing cutout moves quickly. An undermount or farmhouse install needs more fitting, support hardware, and precise sealing.

The condition of the existing plumbing counts too. Corroded supply valves or shutoffs may need replacing along with the sink, and a cramped cabinet with a disposal takes longer to work inside.

Jobs outside normal scheduling are priced differently than standard daytime appointments. In some areas, permits or code inspections add to the job. Because there are so many moving pieces, a plumber gives an exact quote after seeing your sink and hearing what is wrong with it.

How Plumbing Pros serves your area

Plumbing Pros handles sink work for homes and businesses across the country. That covers kitchen sinks, bathroom sinks, laundry and utility sinks, rentals with heavy turnover, and commercial kitchens where fixtures take daily abuse. The process stays the same: find the source, fix it properly, and test it under full flow.

All connections follow local plumbing code for drains and supply lines. New sinks are matched to the existing countertop cutout whenever possible, so your counters stay intact. Tell us what your sink is doing — leaking, cracked, draining slowly, or part of a remodel — and the right repair or replacement gets lined up for you.

Features

  • Strainer basket resealing and replacement
  • P-trap, tailpiece, and drain assembly repair
  • Pop-up drain and disposal flange rebuilds
  • Drop-in, undermount, farmhouse, and vessel sink installs
  • Supply line and shutoff valve replacement
  • Full-basin release test on every completed job

Benefits

  • Cabinet and floor damage stopped before it spreads
  • Quiet, odor-free drains with properly seated seals
  • New sinks matched to your existing countertop cutout
  • Kitchen downtime kept short with an organized workflow
  • Clear repair-versus-replacement guidance before work starts
  • Shutoff locations shown to you at the end of the visit

Frequently asked questions

Can a cracked sink be repaired, or does it need to be replaced?

It depends on where the crack is. A crack through the porcelain bowl or enamel worn to bare metal usually means the sink should be replaced, since repairs to the bowl itself rarely hold. Cracked drain parts, strainers, or tailpieces are a different story — those swap out easily.

Do I need to buy the sink myself before the installation?

A plumber can work with a sink you already bought, or help you choose one that fits your countertop cutout. The key measurement is the cutout itself — the new sink has to match its size and the mounting style your counter supports.

Why is there water under my sink even though I never see it drip?

Slow leaks only show up while water is draining, so the cabinet looks dry when you check. Common sources are a loose strainer basket, a split P-trap, a weeping supply valve, or the flange where the disposal meets the sink. A full-basin release test finds every one of them.

Can a leaking sink damage my cabinets?

Yes, and it usually starts invisibly. Particleboard and plywood swell, laminate lifts, and damp wood grows mold in a dark cabinet. Catching a leak at the musty-smell stage saves the cabinet; waiting until the floor sags often means replacing parts of it.

How long does a sink installation take?

Most straightforward replacements are finished in one visit, since the cutout and plumbing are already in place. Installs that need a larger cutout, moved drain lines, or new shutoff valves take longer — and you will know the plan before work begins.

Call (877) 401-2673 to get started
Call (877) 401-2673