Slab Leak Repair Near Me

Technician pinpointing a slab leak with listening equipment

Starting price: Call for pricing

A slab leak is a pressurized water line leaking beneath your home's concrete foundation. Plumbing Pros pinpoints hidden slab leaks with acoustic listening equipment and thermal imaging, then fixes them with a targeted spot repair or an overhead reroute. You get an exact location, a clear set of options, and a repair completed with minimal disruption to your home.

What slab leak repair covers

Slab leak repair fixes a water line leaking beneath or inside your home's concrete foundation. First, the plumber pinpoints the leak with listening or imaging equipment. Then it is stopped with a spot repair, a reroute through walls or attic, or a repipe of the affected run. It covers detection, the repair itself, and closing up the work area afterward.

Most slab leaks form in copper water lines installed when the house was built. These lines rest directly in or under the concrete, where soil chemistry or tiny pitting can wear a pinhole from the outside in. Pipe can also rub against concrete at penetration points until the wall thins and splits. Hot-water lines fail more often because heat expands the pipe and speeds the process along.

This covers the plumbing: the leak and the water line around it. Foundation lifting or structural slab work belongs to a foundation contractor. If drywall, flooring, or cabinets are already damaged, their restoration is a separate trade after the pipe is fixed.

Signs you may have a slab leak

  • A patch of floor feels warm underfoot even though the heat is off
  • You hear water running inside the floor when nothing is turned on
  • Your water bill jumps even though your usage has not changed
  • The water meter moves when no fixture in the house is running
  • Carpet stays damp, wood floors cup or warp, or a musty odor appears near the floor
  • Water pressure drops at sinks or showers
  • Cracks spread across the floor or interior walls

One or two of these signs together is usually enough reason to request a professional leak location.

How we find the leak before we repair it

A good repair starts with an accurate location. Guessing wrong means cutting concrete in the wrong spot, so Plumbing Pros treats detection as its own job before any repair work begins.

The visit usually starts with a pressure test on the home's water lines. A pressure drop narrows the search to the hot or cold side. Isolation valves then divide the line into segments, and each segment is tested until the leaking section is identified.

Acoustic listening equipment does the fine work. Pressurized water escaping a pinhole makes a distinct sound through concrete, and a sensor can triangulate it to within a small area. Thermal cameras pick up the heat signature of a hot-water leak spreading under the floor. The technician marks the spot on the floor and explains the finding before any repair option is discussed.

How the repair works

There are three ways to fix a confirmed slab leak. The right choice depends on the leak's location, the pipe's condition, and how many leaks the line has.

A spot repair opens the slab directly at the marked leak point. The technician cuts a controlled opening in the concrete, exposes the pipe, replaces the damaged section, and patches the opening. This approach suits a single leak in an accessible line with pipe that is otherwise sound.

An overhead reroute abandons the leaking line under the slab and runs a new line through walls or the attic. Nothing under the concrete is touched, so the slab and finished flooring stay intact. This is often the better answer when the slab sits under finished floors or when the old line has already sprung more than one leak.

A repipe replaces longer runs of aging pipe that keep failing. If the pressure test finds several weak spots, fixing them one at a time costs more in the long run than replacing the line in one visit.

During the work the water stays off for part of the day, and dust control and cleanup are part of every job. Concrete patches are finished flush; new finished flooring over the patch is a separate trade.

What affects the cost

No two slab leak jobs cost the same, and an honest answer names the factors that move the number. The leak's location matters most: a leak near a bathroom wall is simpler to reach than one in the middle of a large room. The repair method matters next, since a spot repair and a full reroute are very different scopes of work.

The length of pipe replaced, the number of leaks found, and the condition of the surrounding line all shape the job. Access matters too: tile or hardwood takes more care than bare concrete. Any water damage already done — swollen baseboards, stained drywall, damp subfloor — adds restoration work outside the plumbing itself.

Exact pricing only comes from a quote written for your house. Ask for it to list detection, repair, and restoration as separate line items.

How Plumbing Pros serves your area

Plumbing Pros handles slab leak work for the homes where it shows up most: single-story slab-on-grade houses, older homes still running original copper, and rental or commercial properties built on slabs. It covers suburban neighborhoods, new builds with high water pressure, and any address with main lines under concrete.

When you schedule, describe what you are seeing — the warm spot, the bill, the sound — so the technician brings the right equipment on the first visit. The visit covers the pressure test, the location work, and a walkthrough of your options at the marked leak point. When the job is done, the work area is patched and cleaned, and the water is back on.

A slab leak rewards fast action and punishes delay. If the signs fit, request a leak location and get a plan based on your house, not a guess.

Features

  • Acoustic listening equipment that hears leak noise through concrete
  • Thermal imaging cameras that map hot-water leak paths under floors
  • Pressure and isolation testing to confirm the leak before any repair
  • Targeted spot repair through a controlled slab opening
  • Overhead pipe reroute that avoids cutting the slab entirely
  • Patched concrete openings and dust control on every job

Benefits

  • Pinpoint detection means we open only the area that actually needs work
  • Overhead reroute options can save your slab and flooring from demolition
  • Fast diagnosis stops wasted water and limits damage to your home
  • Every repair option is explained to you before any work begins
  • One accurate visit usually replaces repeat guesswork and return trips
  • Repairs restore normal pressure, dry floors, and peace of mind

Frequently asked questions

How do I know if I have a slab leak or something else?

Try a meter check: turn off every fixture and water-using appliance, then watch the meter for fifteen minutes. If the dial or leak indicator keeps moving, water is going somewhere it should not.

Do you have to tear up my floor to find the leak?

No — detection is non-invasive. Pressure testing, acoustic listening, and thermal imaging locate the leak without cutting anything; only the small, marked area with the confirmed leak is opened.

Is rerouting the pipe better than breaking the slab?

It depends on your house. A reroute leaves the slab and finished flooring untouched, which suits finished homes or lines with multiple weak spots. A spot repair is simpler and faster when the leak is single, accessible, and the surrounding pipe is sound.

How much does slab leak repair cost?

Cost follows the job's specifics: the leak's location, the repair method, the length of pipe replaced, and the access involved. An exact price comes from a quote written for your house — ask for one that separates detection, repair, and restoration.

Can a slab leak damage my foundation?

A leak left running can erode soil under the slab and create voids that let the concrete settle or crack. That is why the signs — warm floors, rising bills, running-water sounds — are worth acting on early rather than waiting to see.

Can I fix a slab leak myself?

No. Finding the leak takes pressure testing and listening equipment, and fixing it means working inside the slab. A wrong guess usually means opening concrete in the wrong place first.

Call (877) 401-2673 to get started
Call (877) 401-2673