Whole-House Water Filtration Systems Near Me

Starting price: Call for pricing
A whole-house water filtration system treats water at the point where it enters your home, so every tap, shower, and appliance draws filtered water instead of just the kitchen sink. Plumbing Pros tests your water on site first, then sizes and installs equipment matched to your home's flow and your water's actual makeup.
What a whole-house water filtration system is
A whole-house water filtration system is a treatment unit installed on your home's main water line, right where the supply enters the house. Water passes through it before branching to any tap, so every faucet, shower, toilet, and appliance uses filtered water. Most setups pair a sediment pre-filter, which catches sand and rust flakes, with a carbon media tank that pulls chlorine, chloramine, and the compounds behind bad taste and odor out of the flow.
It is not a water softener. A softener swaps calcium and magnesium for sodium to fight scale; a filter removes taste, odor, sediment, and chemicals. Some homes need both, but they are different machines solving different problems. A whole-house filter also is not the same as a pitcher or faucet attachment. Those polish water at one spot; a point-of-entry system treats the supply for the entire home at once.
When your home needs one
The complaints that lead homeowners to test their water tend to sound familiar. Any of these point toward a problem filtration can fix:
- Water that smells like a swimming pool, strongest at the tap nearest the main
- A chemical or metallic edge in drinking water and morning coffee
- Glasses that turn cloudy, then clear from the bottom up as fine particles settle
- Orange or brown streaks in toilet bowls, or reddish stains in sinks and tubs
- White crust building on shower doors and fixtures
- Sudden taste or odor changes after nearby main repairs or flushing work
- Faucet cartridges and water heaters wearing out faster than they should
Taste and odor trouble usually traces back to chlorine or chloramine, added at treatment plants to keep water safe in the mains. Staining comes from iron or manganese. Cloudiness means sediment is riding along. No two supplies are alike, which is why equipment should never be picked without a water test first.
How installation works
The job starts with an on-site water analysis. We sample your tap water and check for chlorine or chloramine, sediment levels, iron, and hardness, so the equipment matches what is actually in your pipes rather than a guess.
Next comes sizing. A system has to keep up with your home's peak demand — every shower, washer, and dishwasher running at once — without starving fixtures of pressure. We size the sediment pre-filter and carbon tank to the number of bathrooms and fixtures, not just the square footage.
Installation itself happens on the main line, just past the shutoff valve where the supply enters the house. The technician cuts in the pre-filter housing and media tank, adds a bypass valve so water can still flow during maintenance, and checks every joint for leaks. The final step is a start-up flush that clears loose media and air from the lines, followed by a walk-through of what was installed and when to check on it.
What affects the cost
No honest contractor quotes this job sight unseen, because several real factors move the scope. The size of the system matters most: a large household with high peak flow needs bigger tanks and more media than a small one. Incoming water quality matters too — chlorine alone is simple to handle, while chloramine, iron, or heavy sediment call for specialty media and extra stages.
Plumbing access plays a role as well. A main line in an open basement is straightforward; one buried in a tight crawlspace or finished wall takes more labor. The condition of the existing shutoff valve and main, plus whether the layout needs a bypass loop or extra fittings, rounds out the picture.
The useful question is not the number but the fit. A system matched to your water and your home's demand works better and lasts longer than a mismatched one.
How Plumbing Pros serves your area
Plumbing Pros works with homes of every age — older houses on original plumbing, newer builds on municipal supplies, and properties drawing from private wells. Each one gets the same starting point: a water test, honest findings in plain words, and equipment sized to the home, never a one-size answer pulled from a catalog.
Single-family homes are the most common job, and small businesses with kitchens or customer-facing restrooms use the same point-of-entry approach. If your water has been telling you something is off — the smell, the stains, the taste — reach out to Plumbing Pros and start with a test. That one visit answers every question the equipment choice depends on.
Features
- On-site water testing before any equipment is recommended
- Point-of-entry systems sized to your household's peak flow
- Sediment pre-filters paired with carbon media tanks
- Installation on the main line past the shutoff valve
- Configurations for chlorine, chloramine, iron, or odor issues
- Scheduled filter and media maintenance visits
Benefits
- Better-tasting water from every tap, not just the kitchen sink
- Shower water that feels gentler on skin and hair
- Less sediment and grit wearing down faucets and valves
- Fewer orange stains in toilets, sinks, and laundry
- One system replacing a collection of pitchers and faucet filters
- Cleaner-tasting water for cooking, coffee, and ice
Frequently asked questions
Is a whole-house filter the same as a water softener?
No. A filter removes taste, odor, sediment, and chemicals like chlorine. A softener swaps calcium and magnesium for sodium to reduce scale buildup. They solve different problems, and some homes benefit from both.
How much does a whole-house water filtration system cost?
It depends on the home's size, water demand, incoming water quality, the type of media needed, and how easy the main line is to reach. Because no two homes match, the only honest answer comes from an on-site water test and a look at your plumbing.
Will it remove both chlorine and chloramine?
Standard carbon tanks handle chlorine well. Chloramine, a longer-lasting disinfectant some treatment plants use, needs catalytic carbon and more contact time. An on-site test shows which one is in your supply.
How often do filters and media need attention?
The sediment pre-filter gets swapped when the gauges show a growing pressure difference across it. Carbon media lasts over its service life, which depends on water quality and household use. Taste creeping back or pressure dropping are the usual signs it needs attention.
Do I still need one if I have city water?
Yes. Cities add chlorine or chloramine to keep water safe in the mains, and aging pipes add sediment and rust along the way. Testing tells you exactly what is in your tap before you buy equipment.
Can I keep my fridge filter or under-sink unit too?
Yes. A whole-house system handles taste, odor, and sediment at the entry point, while a fridge filter or under-sink unit polishes water for drinking. Many homes run both without conflict.